/ Folding cartons / Seal end PD-02-003CUSTOM-TUCK-SEAL
Tuck top, glued bottom carton A tuck-end top over a glued seal-end bottom. The bottom is closed on the folder-gluer and never opened again; the top tucks, so the pack can be opened and closed by the user. The standard pharmaceutical and cosmetics construction.
Flat blank —
Rule length —
Area —
Panels —
Size & options Reset to defaults Dimensions Flaps & tabs Top tuck lock Friction lock (shoulders) Slit lock Friction lock: the tongue's shoulders ride over the dust flaps and hold by friction. Slit lock: two slits on the tuck crease make the tongue's corners catch, so the end has to be pressed to open.
Bottom glued flaps Full overlap (ECMA 10) Reduced flaps, one full flap (ECMA 11) Full overlap: the inner and outer flaps both reach across the end and are glued face to face. Reduced flaps: only the outer flap reaches across; the other three are cut short and it is glued down onto them.
Bottom outer flap on Panel 1 (the joint panel) Panel 3 (opposite the joint) Which panel the flap that comes down last hangs from, counted from the glue joint as the ECMA code counts. It decides which face shows the glue line, so it follows the print.
Glue flap side Left Right Which edge of the blank carries the manufacturer's joint. Right mirrors the whole blank - every panel, flap and lock - so the box folds the same way with the joint on the other side.
Production Features Bottom draw the seal glue area
Advanced settings+ Order this box Our structural designers review the final dieline before production.